Poor adhesion


Low adhesion on bare metal (steel, zinc, aluminium)

  • Unsuitable substrate
  • Insufficient substrate preparation.
  • Without proper priming prior to painting finish on surfaces.

  • Avoid incompatible materials such as a thinner with enamel products, or imcompatible sealers and primers.
  • Allow sufficient flash and dry time.
  • Select the correct thinner and diluter specified on the Technical Data Sheet.
  • Solvent test and remove solvent-sensitive substrates.
  • Avoid excessive film thickness.
  • Prime surface with proper primer before painting finish on it.

Subscribe Newsletter
For receive our latest updates
Facebook Twitter